Metamark | MG-X-005-137-50Y

• 2mil., Cylinder Cast PVC Overlaminate
• Permanent Clear Solvent-based Adhesive
• 140gsm Layflat PE Kraft (Blue Print) Liner
• Abrasion Resistance – High
• UV Protection – Medium
• Chemical Protection – Low
• Use: Protection on full and partial vehicle wraps

• Medias: MetaWrap MD-X and MetaWrap MD-XB
• Finishes: MG-X-005 Clear Gloss | MG-X-002 Clear Matte

• For optimal results, it’s recommended to use knifeless tape to relieve the material in recessed areas. While the hybrid cast film is capable of conforming to these channels, air often gets trapped during installation. As temperatures rise, that trapped air can expand and cause the film to lift or pop up.

Because this is a hybrid cast—not a full premium cast—expectations should be set accordingly. Hybrid materials require more attention during application to ensure durability and a clean finish.

Compared to premium cast films, the hybrid cast offers excellent performance at a lower material cost—making it an ideal option for budget-conscious jobs or high-volume work.

Industry-standard relief cutting with knifeless tape offers a major upside:
- It simplifies the install process in recessed channels
- Reduces the risk of failure due to trapped air
- Cuts down on time and rework
- And—most importantly—it helps installers maintain high quality while protecting their bottom line

Installers should take a few extra minutes to:
- Remove even the tiniest air bubbles
- Apply multiple rounds of heat and pressure to reset the film’s memory
- Ensure complete adhesion in recessed zones